CLS Control Display at the handlebar.
CLS EVO pump, held in place by the rubber holders glued to the frame and some cable ties.
Oil pipeline laid and connected to the pump.
CLS EVO Tour control unit at the inside of the casing, held in place with 3M dual-lock velcro.
Oil tank with the aluminum holder underneath the seat.
Placing the ventilation hose. Put a hose-connector at the end and secure it in place with the small clip, which can then be stuck to the casing.
Laying the cables to the battery and the CLS Control at the front.
Connect the system to the battery's + and - poles. Shorten the cables by making loops, hold them together with cable ties and secure them in place with the small cable clip.
Securing the cables with a clip.
Guiding the oil pipeline from the swing's pivot upwards to the left side of the bike.
Oil pipeline at the swing's pivot.
Oil pipeline at the underside of the swing, going towards the swing's pivot.
Guide pieces at the inside of the swing.
Oil pipeline running through the inner side of the swing.
Mounting the rubber holder block at the swing and placing the nozzle at the sprocket.