Rotary switch with unscrewed lock nut.
Provide plastic plate with holes for the rotary switch axle and anti-rotation protection.
Insert the rotary switch into the retaining plate from behind and tighten it with the lock nut and washer.
Put the knob on the axle and tighten it with a 9 mm socket spanner.
Cover on the rotary knob.
Retaining plate with rotary switch on the frame on the left.
CLS Basic control unit under the left side panel.
Cable looped behind the side panel.
Side panel in front of the control unit and the cable loops.
CLS EVO pump fixed behind the right side cover with retaining plate and retaining rubbers. The rubber holders and the retaining plate are not included in the kit.
Connection cable of the pump looped behind the side cover.
Tank with aluminium holder (the Basic Kit does not include the aluminium holder) in the rear.
Tank ventilation fixed in the rear with cable clip and hose connector.
Oil line routing (oil line in black braided hose) at the top of the frame.
Oil line routing on the frame.
Oil line behind the frame away from the swingarm pivot point.
Oil line at the swingarm pivot point.
Oil line under the swingarm on the right front.
Oil line routing under the swingarm bridge and on the inside of the swingarm.
Oil line routing on the swingarm.
Retaining end piece on the underside of the swing arm.
Nozzle on the sprocket flank.