The CLS Control display is an alternative to the CLS rotary switch and can be chosen optionally instead of the rotary switch. It is ideal for motorcycles with a handlebar and a visually appealing solution for operating CLS products from the handlebar.
The display is operated via two buttons and shows the current setting of the respective systems attached to it.
The display lights up for only 6sec before going out, not to distract the driver (especially during night time). The recently used setting is being saved and continued, even after a restart of the vehicle.
The chain oilers of the EVO series have two offroad modes (setting 9 and 10) and a rain mode (setting 11). These settings are displayed as “H settings” (H for high) with one, two or three lines next to it. In these settings, much more oil is dispensed than in the base setting. Because of this, the display activates itself in these and the setting 0, once every 5min and flashes ten times. This way, you won’t forget to turn back the increased oil output after offroading or driving in the rain.
With the CLS Control, you can operate the chain oilers CLS EVO Tour and CLS EVO Sport, as well as the heated grip system CLS Heat.
It is also possible to operate a CLS chain oiler and the CLS Heat, both at the same time, with one display. If you want a CLS Control for both systems, please note it accordingly when ordering.
CLS Control display, ideal for handlebars.
It is just 3.3 X 3.0 X 1.1 cm small (h;w;d).