CLS Control Display at the handlebar.
Pulling the display cable through underneath the fuel tank.
Pull the display cable through underneath the fuel tank with a wire and some tape to prevent needing to detach and reattach the fuel tank.
The display's connector.
Oil tank with aluminum holder inside the back compartment.
Oil tank's ventilation hose, placed as high as possible.
Back compartment with oil tank.
Control unit at the left side.
Battery connection.
Simply connect the cable to the battery's poles.
Mount the rubber holders on the pump and glue them to the holder plate.
Fix the holder plate in place.
Holder plate on the right side.
First, ventilate the system up to the pump's exit. This will save you a lot of time.
CLS EVO pump in its holder. After venting, attach the oil pipeline coming from below to the pump's connector.
Oil pipeline at the upper part of the frame.
Oil pipeline at the frame, covered with braided sleeving.
Oil pipeline behind the brake cable at the frame, covered with braided sleeving.
Oil pipeline at the swingarm pivot, covered with braided sleeving.
Oil pipeline at the underside of the swing.
Oil pipeline at the underside of the swing.
Oil pipeline at the inner side of the swing.
Oil pipeline at the inner side of the swing.
Nozzle at the inner side of the sprocket, view from above.