CLS Control Display mounted on the mirror clip using the CLS Aluminum mouting plate (sold separately).
Use some wire and tape to pull all the cables through to the handlebar.
Throttle grip removed and ground.
Final roughening of the throttle grip after reinstallation.
Right-hand side heated grip (13.2 cm).
Cable routing of the right-hand side grip.
Cable routing of the right-hand side grip.
Temperature sensor fixed to the cable of the left-hand side grip.
Cable routing at the steering head.
Looped cables underneath the fuel tank.
Cable routing underneath the fuel tank.
Cable routing on the left-hand side.
CLS EVO Plus control unit next to the battery.
Custom mounting plate from the "DesertX Kit" with oil pump and a unique oil tank.
Ventilation hose clipped to the oil tank.
Mounting plate installed underneath the vehicle's rear.
Ventilation hose end piece underneath the pillion seat.
Oil line routed behind the frame and covered with a black braided sleeve.
Oil line on the swingarm, next to the brake line.
Oil line routing on the swing arm bridge.
End retaining block of the oil line on the inside of the swingarm.
Nozzle on the sprocket flank.
